Komatsu PC210-10 MO M0 boom hydraulic cylinder 707-G1-06010

Komatsu PC210-10 MO  M0 

boom  hydraulic cylinder

part number  707-G1-06010

Hydraulic Cylinder Maintenance

1 Check whether the hydraulic oil used in the hydraulic system meets the requirements and whether the oil is clean, otherwise it must be filtered or replaced.

2  Calculate the service time of the hydraulic cylinder, if it exceeds 6000 working hours, it is recommended to replace the seals.

3  For hydraulic cylinders applied to filters, it is recommended to clean up the sludge accumulated on the filter plate, and check whether the piston rod is inclined when it moves back and forth. If so, please make adjustments to avoid adverse consequences.

4  In order to ensure the normal operation,service life and safety of the high pressure hydraulic cylinder, it is recommended to design exhaust device and overload pressure relief device when designing the hydraulic system to ensure the safety of the high-pressure cylinder.

5  Before disassembling the hydraulic cylinder, the system should be unloaded, the circuit pressure should be zero, the oil source should be cut off, and the oil port should be blocked after loosening the oil port piping to ensure safety.

6  When the hydraulic cylinder leaks and other faults need to be disassembled and repaired, the piston rod should be moved to the bottom of the cylinder first, and it is strictly forbidden to hit with hard objects during disassembly, so as to avoid the sudden drop of the piston rod and cause damage.

7  Inactive or idle hydraulic cylinders for a long time should be turned on and operated regularly, so that all hydraulic cylinder components can be completely lubricated, so as to avoid rust on the working surface and affect the normal application in the future.

8  The hydraulic cylinder you choose is elaborately manufactured by JDF HYDRAULIC and delivered after 100% inspection. Please operate and maintain it according to the provisions of this instruction. The working environment of the hydraulic cylinder is ever-changing, and we are striving to do better on design and manufacturing. JDF HYDRAULIC is responsible for free replacement or repair within 12 months from the date you received the product if it can be confirmed that the parts are damaged due to our manufacturing problems and cannot be used normally.